Accessories
Two core, plain annealed copper wire (PACW) conductors, special PE insulated unsheathed flat figure 8 cable.
Features
• For Inductive Lighting equipment (IPH systems)
• Suitable for in ground applications.
• Long term water and corrosion resistance
• Capable of withstanding high temperatures
• Low smoke and halogen free
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Capacitor Joints are inserted into the cable to compensate for inductive reactance in IPL systems over 300m.
Kit comprises
• 1x IPL Capacitor Joint - assembled
• 4x 1.5mm² cable crimp lugs
• 4x Heat Shrink tubes
• Instruction sheet
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Plastic cable separator at Tunnel Guidance Marker locations. Each marker requires a node separator between the cables to inductively couple power from cable to TGM LED marker.
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Plastic cable separator at IPH marker location. Each marker requires a node separator between the cables to inductively couple power from cable to LED marker.
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Inductive coupler to transfer power from cable to IPH Marker over an extended distance. Only available on special request.
Features
No node required
Can eliminate the need for saw cutting of cable
Can allow for cable to be in existing ducting
Up to 5m in length
Can be flexible or positioned at a fixed angle
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Canister for IPL X LED Markers. Ideal for lighting solutions on roads where recessed LED markers are required.
Features
• For use with IPL X LED Markers
• High impact strength polycarbonate housing
• Flame Retardant with flammability rating of UL 94 V-0
• Easy installation and maintenance
• Supplied with cable retaining washer and nut
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Base canister for IPH On-Road markers (not compatible with Smartstuds). Ideal for recessed marker systems where removability is desired.
Features
• For use with Tunnel Lane Markers fitted with ONROADLED Flanges
• Embedded Base for removable ONROADLED markers
• Does not replace IPH Node
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals
Polycarbonate wall-mountable housing used to provide easy installation of Tunnel Guidance or Exit Markers on walls or above road surfaces. Used in conjunction with the IPL Node.
Two core, plain annealed copper wire (PACW) conductors, special PE insulated unsheathed flat figure 8 cable.
Features
• For Inductive Lighting equipment (IPL systems)
• Suitable for in ground applications.
• Long term water and corrosion resistance
• Capable of withstanding high temperatures
• Low smoke and halogen free
For full technical specifications see our product spec sheets
Or for the latest installation methods see our installation manuals